You guys saved me with my Beretta Pintail. The original recoil tube broke. Only replacement I found was yours. Outstanding product! The machine work was perfect. Thanks for remembering these older guns. Without your system I would have a parts gun. Thanks again.
I just wanted to give you guys a big thanks, I use both your Sure Cycle recoil system and had you guys seal my gas piston. This past weekend is literally the first time I have felt complete satisfaction with my FN SLP MK1 shotgun. I could not be more pleased and will be sure to send more business your way. If I buy any more shotguns, I will be sure to have you guys do work on it or buy my parts from you guys. Thanks for everything!
I finally had a chance to test out the new piston: now she runs like a swiss watch! Thanks for the great service!
Just wanted to say “thanks” for sealing the piston on my new FNH SLP. I was ready to sell that gun at a big loss before I found your company mentioned in a forum of other SLP owners who also had problems cycling target loads. Now it cycles every cheap load I feed it with no FTF or FTE issues. I know now this gun was really not designed to shoot light loads but who can afford to go out and shoot a couple hundred heavy rounds in an afternoon? For sure – not me! And it’s not like the manufacturer is going to tell you that before you buy one. You guys are the best.
Wanted to say Thank You for the job you did on my gas piston for my Winchester SX2 Practical. Before your modification I couldn’t shoot/cycle 2-3/4″ dram 12 gauge shells. The gun would fire and eject but not load a new shell. I installed the modified piston as soon as I received it and just did a test fire of the gun. Super Happy. Fired, ejected and loaded 2 3/4 dram loads. Again Thank You!
Duck Hunters, these boys at Sure Cycle are better with shotguns than I am with ducks. They make mediocre shotguns great, and great shotguns even better!!! Demand dependability. The folks at Sure Cycle are the best. “The Duck Commander”
The Sure Cycle came today and it installed in 15 minutes. I thought you would appreciate the pictures of what came out. The original equipment was no longer functioning, as you can see corrosion was pretty bad and the inertia spring would no longer keep the bolt closed. My last hunt with it was a sightseeing trip. I can’t wait for this weekend. Carson City – NV
I received the M3 tube [16″ one] this morning, and just cut the front of the old tube off the shotgun, and fitted the new one. Its a perfect fit, and the gun is now 11 + 1. I am absolutely delighted with your product, the quality is superb but i am even more impressed with your delivery times and outstanding customer service, especially as I’m not even in the USA, but England. We will be doing more business Sir, and I will be directing my friends and customers towards your products too.
I was experiencing cycling problems with my AL391camo Urika about a year after I purchased the gun. I kept it clean and this gun sees a lot of rounds so I installed a new factory recoil spring yet would still have the occasional hang-up. I stumbled onto your website ordered and installed a Sure Cycle system. Hunted the entire 2005 season without a cycle failure and here’s the biggie, I did not clean the gun once. Thank you for an awesome product. Sure Cycle, don’t even think about leaving home with-out it!!!
Just got back from the gun club. AWESOME! The tube is everything you said it is. It’s rare to find a company to make aftermarket parts better than the factory but Sure Cycle has done it with Sure Cycle Systems. I can actually tell the difference while shooting skeet. No more of that double shuck feeling when the gun cycles the second shot with the added assurance of no problem in the duck blind! Thanks for producing such a fine product. Every serious duck hunter should have one installed.
Got your cycling system on my gun and went and shot on Sunday. WHAT A DIFFERENCE!!!! I cannot tell you the way this gun feels now. The action works (don’t get your fingers in the way boys and girls) like a bear trap and the felt recoil is down by at least 20%. With your permission I will get your name on my shooting gear for the 2000 season and introduce your product to the rest of the team.
I bought my Beretta A390 in May of 1995. I hunt in both salt and freshwater marsh and clean my gun thoroughly as soon as I return to my truck. Though my A390 is an expensive shotgun, I have experienced cycle failures in each of the four seasons I have used it. Last season I only hunted for four days (birth of a daughter) and experienced two cycle failures! When I disassembled the cycling mechanism in the stock, the spring was massively corroded (almost broken through about 1 inch from the end). In addition there was a substantial kink about 2 inches from where the spring inserts in the follower. Together these problems made the action cycle poorly, leading to cycle failures. I installed a Sure Cycle mechanism this Spring. The entire installation took about 15 minutes, from a completed assembled gun containing the old mechanism to a completely assembled gun with the installed Sure Cycle. The difference after installation was remarkable. The action closes with authority and, coupled with the Stainless Steel construction, I envisage no cycle failures in the future. So far I have shot several hundred rounds through the weapon (mostly #8 skeet, fifty or so #2 steel and a dozen or so buckshot loads) with no cycle failures. The cycle time between shots is unbelievably short. So far I have been extremely impressed by the quality and functioning of the Sure Cycle. A season in the marsh this Fall will be the true test, and I believe I will be writing next Spring to say how impressive it functioned.
I stood in a frozen corn field this past winter with a $600 Semi Auto single shot shotgun while wave after wave of mallards dropped around my friends and I. My Beretta AL390 would not cycle the second, much less the third shells into the chamber. I immediately found Jeff and his Sure Cycle system through friends on the internet. He said his system would take care of my problem and it has. I have not had a slow or no cycle in my Beretta since, in fact the cycle seems much faster than original. I can’t wait to shoot an entire season with the new system. Thanks!! Tennessee
Your sure cycle turned my Beretta AL 390 from a piece of junk to the finest shooting of my 12 duck guns. GREAT product! Pierre Part, LA
Myself, Scott and Jamey all installed the new Sure Cycle Recoil Spring Tube System in our Guns, 2 SBE’s and 1 Beretta A390. The installation was a snap in the SBE’s, probably about 15 minutes in all. Once you get the Tube off the receiver, all is simple. My tip for getting the old tube off the receiver is to not to be worried about being too careful, throw the receiver in a padded vice and put a pair of Vice Grips on it close to the receiver and torque away it will come off. The Beretta was a little more difficult, just because of the design of the gun, but anyone can handle it. You could notice the difference in speed of return right off the bat by just opening and closing the bolt. The true test was in the firing. The Benelli, you could notice a difference in the cycling and speed of firing from the old one pretty noticeably. We fired approximately a box thru each gun and never had a bit of trouble, each load locked up very quickly and tightly with no hesitation at all. The big difference was in the Beretta. I have just one word for it INCREDIBLE!!!! The speed the gun picked up by just installing this tube kit was nothing short of a miracle. The Beretta also fired a box of shells with no hitches. In closing on this product, anyone with a Beretta or Benelli, you are short changing yourself if you are using the factory tube recoil system, in my opinion. It is a must have!! Moline, IL
Hey guys this thing is fantastic. It shoots so smooth and fast that I can’t believe it! Every type of load that I tried, doesn’t matter. Just like you said it would!. Best aftermarket product that I have ever bought!
I have one Sure Cycle in my first (Limited Edition) Diamond Grade Beretta 390 and I just bought a second (Limited Edition) Diamond Grade Beretta 390. The gun has functioned flawlessly for a number of years since I put the Sure Cycle in it. I would like to buy a second Sure Cycle. NSCA Level 3 Instructor
I wanted to thank you personally for the swift and accurate service and advice you gave me concerning my 11-87 shotgun. My Dad and I ended up chiseling off the factory “thimball” nut that had welded itself to the threads. Just like you said, after that it was a breeze. We did bugger up some of the threads and had to do some filing to get your hex nut on, but when it did finally go on I felt like I had a brand new firearm. Man what a difference it made. It appears there is less felt recoil and my 11-87 cycles like a dream. I now have a Beretta Silver Mallard that will probably get the same attention when I can afford it. I’m hoping the installation will go a little better on the 390. You may use this for publicity if you so desire. Thanks for a great product and excellent service! Duck Hunter NC
I bought a new Browning Gold Sport a while back. No matter what I did to it or how I cleaned it, it would not go more than eighty shots with my reloads without slowing down. So, I was in the undesirable position of having to spray oil in at during registered shoots which is very distracting. I had a local gentleman install one of your Sure Cycle stainless steel spring and tube systems. First of all I was highly impressed with the quality of it compared to the original. It was obvious that the original was not completely decompressing its entire link. In any event, to test the improvement, I shot a total in excess of five hundred rounds over several days without cleaning it. I did not have one malfunction and it ejected and closed quite smartly for the entire time. I finally cleaned it due to an important shoot that was coming up, but I have had zero problems ever since. I clean it every now and then just to be safe, but it doesn’t slow down on me any more. It is well worth the price. I have recommend it to other shooters and those that bought them agreed that it is an excellent product. You have my thanks and congratulations. Good luck in every thing you do. Bloomfield Hills, MI
I have a number of Sure Cycle systems from you for my Benelli shotguns. I also have custom stocks. A couple of years ago I sent all the guns to you because they still would not cycle reliably. You are the only one who figured out the problem, that the new stocks made the guns too heavy, changed the inertia or mass of the guns just enough that they would not cycle. I finally convinced the stock maker and he redid the stocks hollowing them out and removing any wood he could to make them lighter without changing the essential shape of the stock. Well I just returned from a quail trip to Mexico where the three of us in our party (all using Sure Cycle in our Benelli 20’s) fired approximately 500 rounds each at quail and doves. We had almost no problems with the shells ejecting, even though these were really light cheap Mexican game loads. Thanks again for your great product and keep up the good work. I continue to send more business your way.
Hello, Thank you for your unbelievable response. Your customer service is the best I have ever seen. You should give lessons to a lot of companies. Thanks a million !! P.S. Your customer service is a lot better than mine. As an Assistant D.A., I throw my customers in jail.